互联网环境下的暖通CAD组件模块的开发方法研究

针对单机环境下暖通CAD软件重复开发量大、开发周期长等现状，提出了基于互联网环境的三层体系结构及其开发的通用环境，即整个暖通CAD系统被分为不同逻辑块，开发和管理的工作向服务器方转移，从而使分布处理数据成为可能，基于组件的软件开发是互联网环境中应用软件的主要开发方式，以构架为组装蓝图，以可重用组件为组装预制块，支持组装式软件重用，从而克服人力和物力的浪费，进而为了重用暖通CAD已开发出的功能模块，给出组件逆向工程的开发方法、组装流程和组件管理过程。     

猪肺炎支原体黏附因子基因R1R2区的克隆及表达

根据GenBank登录的猪肺炎支原体232株P97基因和J株黏附因子基因设计了1对引物，以我国猪肺炎支原体Z株(强毒株)基因组DNA为模板，通过PCR方法扩增了该株黏附因子基因的部分序列。经序列分析后，重新设计了1对带有EcoRI和HindⅢ酶切位点的引物，并经引物的定点突变，PCR扩增了Z株黏附因子的R1R2区。扩增产物经双酶切后克隆到表达载体pET-32(a) 中。该重组质粒经酶切鉴定后，将其具有正确阅读框架的重组质粒转化到大肠杆菌BL21(DE3)感受态细胞，37℃下经IPTG诱导表达，得到相对分子质量约29000的融合蛋白，表达量约为11％。     

超临界CO_2流体处理工艺对木材渗透性的影响

以苯—乙醇为夹带剂,研究超临界CO2流体不同处理压力、温度、时间对福建产杉木、马尾松、檫木木材渗透性的影响。结果表明,在35 MPa内,处理压力的增大有利于3种木材渗透性的提高;杉木在处理温度为40℃时,渗透性的变化率达到最大,为493%,马尾松和檫木在处理温度为45℃时,渗透性的变化率达到最大,分别为479%和349%;较佳的处理时间为30 min。     

继电保护用电流互感器的暂态特性数字仿真及电磁优化设计

本文在分析CT的暂态特性及其动态磁化过程的基础上,建立了计及铁芯饱和、局部磁滞回环、动态剩磁影响的CT单、复励磁暂态过程数字仿真模型,提出了继电保护用P、TPX、TPY、TPz级CT的电磁优化设计方法,编制了计算机程序,用于CT的电磁优化设计及数字仿真分析.     

哈达门国家森林公园游客量动态预测

根据哈达门国家森林公园的票房数据，应用灰色系统理论建立旅游量灰色动态模型。基此，对哈园游客量进行了中短期预测，其预测检验精度为９３．７２。旨在对该园建设、管理等项决策提供科学依据。     

Estimating Combining Ability of 4x-2x Crosses in Cultivated Potatoes

Progenies derived from crosses between Solarium tuberosum and 2n pollen-Producing diploid hybrids, exhibit obvious hybrid vigor. The 2n pollen-producing clone can act as a bridge in crossing S. tuberosum and S. andigena with S. phureja. Populations from 4x-2x crosses show more unifomity and less segregation compared with that of 4x-4x crosses. The parent-offspring correlation for the traits, starch content and tuber number, is significant at 0.01 level. The regrssion equations are Y (mp-F1)=1.0 1.2x and Y (mp - F1) = 5.3 0.8x, respectively. The 2n pollen-producing clones play an impotant role in increasing tuber stach content. Estimates of the combining ability for the main yield components indicate that additive effect prodominatcs for such trais as plot yield, tuber weight per plant and starch content, whereas both additive and non-additive effects lay equal stress on mean tuber weight and non-additive effect is important for tuber number. In general, non-additive effect appears to be important in     

棉花纤维发育后期Mg2+,K+-ATP酶的活性分析

1989～1990年选用陆地棉(G.hirstum L.)北农1号品种和海岛棉(G.barbadenseL.)海7124品种为材料,对棉纤维发育后期的纤维素形成过程进行了研究。结果表明:①随着棉纤维的发育 Mg~(2+),K~+-ATP 酶活性逐渐下降。②Mg~(2+),K~+-ATP 酶活性的最适 pH 值为6.5。Mg~(2+),K~+ATP 酶活性随[Mg~(2+)],[K~+]和[NADH]/[NAD~+]的增大而变大。③Mg~(2+),K~+ATP 酶活性变化与还原性糖含量变化呈显著正相关(r=0.811~*),与纤维素含量变化呈极显著负相关(r=-0.900~(**))。④Mg~(2+),K~+-ATP 酶参与了纤维素的形成过程。     

哈尔滨市工农兵钢箱索梁桥模型试验研究

对哈尔滨市工农兵钢箱索梁桥的模型进行了试验和分析。结果表明,该桥设计采用的理论与试验结果基本相符,为桥梁的修复设计提供了可靠依据。     

Performance Evaluation of the ADS 1000 Ventilator Using a Lung Model

A laboratory evaluation was performed to evaluate the performance characteristics of a new veterinary ventilator. The ventilator studied was configured according to manufacturer's directions and attached to a test lung via a pneumotachograph and differential pressure transducer interfaced to a pulmonary mechanics analyzer system. Constant resistance (R=10 cm H₂O/L/sec) and compliance (C=3 ml/cm H₂O) factors were maintained for all trials. The ventilator operated at the manufacturer's preprogrammed parameters. In the first trial, body weight was the only variable. In the second trial, an endotracheal tube was placed in series between the ventilator's breathing circuit and the pneumotachograph. Body weights from 1–20 kgs were evaluated. Mean values for respiratory rate (RR), minute ventilation (VE), inspiratory time (Ti), peak inspiratory pressure (PIP), and peak inspiratory flow (Fpki) displayed on the ventilator control panel; tidal volume (VT), calculated from the displayed minute volume, and identical parameters measured by the pulmonary mechanics system at each body weight, were compared using a two factor analysis of variance. Significant differences (P< 0.05) were found between mean displayed and measured values for RR, PIP, and Fpki.     

基于图形旋转系统的渐进网格研究

拓扑简化可以为渐进网格带来更好的效果，但目前几乎所有的渐进网格方法都不支持拓扑简化，而且edge collapse和vertex split操作有时会产生非流形．针对这些问题，提出了基于图形旋转系统的渐进网格法．以基于图形旋转系统的数据结构和操作实现了渐进网格，用图形旋转系统的操作集合构建了edge collapse和vertex split操作．在此基础上，通过扩展新操作即可进行任意拓扑变化，从而实现拓扑简化，